StitchnCount opens to the Row Counter Screen. This screen displays five unique counters simultaneously. Each counter has its own plus and minus buttons for easy counting.

• The volume button in the bottom left controls whether a clicking sound is played when a counter button is pressed. Press the volume button and a new symbol will appear showing that the sound is on .
• The "Info" button in the lower right displays the help information.
• The "Menu" button in the upper right corner controls all row counters simultaneously. Press the button and a Project Menu pop-up window appears.

StitchnCount provides an project menu providing access to the following commonly used functions:

• Clear All Counter Values - Set all counters back to 0.
• Reset All Counters - Set all numerical values and all customized labels back to default.
• There is also a "Cancel" button in case the "Menu" button was pressed in error.

Each counter also has its own "Settings" button (). Press the button and a pop-up Counter Menu appears. The Counter Menu displays all the commands needed to customize or modify an individual counter.

• Set Counter Label - Change the label default name to a customized name.
• Set Counter Value - Set the counter to start at a value greater than 0.
• Reset Counter Value - Reset an individual row counter back to 0.
• Set Counter Repeat Alarm - Specify a counter repeat alarm and optional linked counter.

To change the counter value, select the "Set Counter Value" button from the menu. The Counter Value Controller window will appear.

Press into the white box below the words "Set Value To". A cursor and numerical keypad will appear. Type in the desired starting value and press the "Done" button located on the keypad or the blue "Done" button in the upper right counter.

The new value will now appear on the Row Counter Screen.

To change the value back to 0, press the "Reset Counter Value" button from the menu. A pop-up confirmation window appears asking if you are sure you want to reset the value back to zero. It will be necessary to select either "Yes" or "Cancel" to finish the command.

To enter a custom name, press the "Set Counter Label"" button from the menu. The Counter Label Controller window will appear.

Press into the white box below the words "Add new label". A cursor will blink in the box and a keypad will appear. Type in the desired name and select the "Add" Button.

The keypad will disappear and the picker will be visible. Scroll the picker to the name entered (this will default to the last name on the picker) and press the blue "Done" button in the upper right corner. The Counter Label Controller window will close and the new custom label will appear.

• There is no length restriction on the custom name that can be specified. However, the font will become smaller as the length of the custom name increases. Once the length exceeds 19 characters, the name will be followed by an ellipsis (...).
• Specifying a custom counter name will make that custom name available for use with any counter.
• To delete all custom names added to the picker, select the "Reset" button. This will delete all custom names from the picker, but will not change the name on the counter. To change the name on the counter, select one of the default labels listed on the picker and select the "Done" button located in the upper right corner.

To set an individual pattern repeat alarm:

• Select the "Set Counter Repeat Alarm"" button from the menu of the specific counter row desired. The Counter Repeat Controller screen will appear.
• The picker will be set on "None". Do not change the picker.
• In the white box under "Set Repeat Value", specify the number of repeat rows in the pattern. For example a lace repeat of 20 rows repeated 40 times. In this case the value input into the "Set Repeat Value" box would be 20.

Once the alarm has been set for a specified row the numbers will show up in red.

Once the specified value has been reached a pop-up menu will appear stating "Repeat Count Completed". Press the "Ok" button. If the "Reset" option was selected, the counter's numerical value will automatically default back to 0. This can be turned off by sliding the "Reset" button to off.